ACTRCCC

ACTRCCC – Gas Car Rules

Rules must be read in conjunction with General rules

	Lesiure Market Kits	Racing Kits	1/8th Racing Kits
Bodies	1/10th 200mm Sedan	1/10th 200mm 4 Door Tourer	240mm Open except GTP
Bodies	Max cutout of: Windscreen 50%; Rear window 100%. Both front side windows and rear window can be removed. Holes for exhaust, glow plug and aerial permitted. Rear wing not to extend past roof height or body width.
Tires Rubber or Foam	Max width: rear 30mm; front 26mm	Max width: rear 30mm; front 26mm	Open
Engine	Max .15 pullstart kit motor, Max 4 ports incl exhaust	Max .12	Max .21
Gearbox	Max 2 speed	Max 2 speed	Max 2 speed
Exhaust	Max tail pipe internal diameter 5.2mm; min tail pipe length 10mm	Max tail pipe internal diameter 5.2mm; min tail pipe length 10mm	Open, noise limit applies
Weight	Min 1700 grams without fuel	Min 1700 grams without fuel	Min 1650gms
Tank	75cc incl fuel lines and filters	75cc incl fuel lines and filters	100cc
Fuel	16% Nitro per volume	16 to 25% Nitro per volume	25% Nitro per volume
Width	Max 200mm	Max 200mm	Max 240mm

General Rules:

* Car must have a functioning brake which must be capable of keeping the car stationary whilst the engine is running.

* No parts of the car, except for the muffler outlet, may protrude outside of the body shell when viewed from above.

* The front of the car must be equipped with a bumper in such a manner that it will minimise a wound in the case of it entering into contact with other participants or members of the public. The bumper must be made from a flexible material with all corners and sharp edges rounded off. The contour of the bumper will follow the contour of the body with which it is being used. At no point may the bumper protrude in front of the body.

* The aerial must be made from a flexible material in such a manner that it will bend completely under the weight of an inverted car.